Abbasi, mehdi Assessment of Empirical and Analytical Methods for the Estimation of Water Intake into the Section 2 of Zagros Tunnel, Kermanshah, West Iran [Volume 9, Issue 3, 2025, Pages 1-21]
Abdollahisharif, Jafar Investigating the unstable zones of Golgohar No. 3 iron ore mine using radar interferometric method [Volume 9, Issue 1, 2025, Pages 11-23]
Abdolmaleki, Mohamad Investigation of shear behavior of rock sample which have discontinuities system made by 3D printer [Volume 8, Issue 3, 2024, Pages 39-55]
Abroshan, Mohammad Reza Experimental and Numerical Investigation of Conventional Methods for Determining Mode I Fracture Toughness of Concrete [Volume 9, Issue 1, 2025, Pages 25-45]
Abulghasem Isfahani, Ali Stability analysis of the slopes upstream and downstream of the road overlooking the Haraz Dam [Volume 5, Issue 3, 2022, Pages 69-89]
Afshin, Hasan Laboratory and numerical investigation of tunnel sections with high ductility concrete (HDC) elements located in squeezing environments [Volume 6, Issue 1, 2022, Pages 63-71]
Afshin, Hasan Application of ductile anchors in inverts of hydraulic structures [Volume 6, Issue 4, 2023, Pages 10-18]
Afshin, Hasan Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
Afzal, Peyman Investigating the correlation between geomechanical factors and the displacement rate of the eastern wall of the Chadormalou iron ore mine using fractal modeling [Volume 6, Issue 1, 2022, Pages 39-50]
Agah, Azadeh Study of failure of closed non-extension plane and stepped joints using PFC2D software [Volume 6, Issue 1, 2022, Pages 51-62]
Aghaei, Mohammad Pouria Numerical Analysis of Tunnel Deformation Behavior and Surface Settlement in Layered Clayey Soils with Emphasis on the Cover-to-Diameter Ratio [Volume 9, Issue 3, 2025, Pages 97-116]
Aghageri, Meysam Evaluation of ground settlement caused by tunneling using the staged excavation method in soft soils [Volume 6, Issue 2, 2020, Pages 52-67]
Aghakhani Emamqeysi, Mohammad Reza Prediction of Elastic Parameters of Carbonate Reservoir from Well Logging Data Using Machine Learning and Multivariate Regression Methods [Volume 7, Issue 2, 2023, Pages 53-70]
Aghazadeh Mohandesi, Jamshid Modeling the dynamic behavior of the rock foundation of the Moshampa Dam [Volume 5, Issue 1, 2021, Pages 42-54]
Ahadi, Hamid Prediction and Optimization of Rock Fragmentation Induced by Blasting Using Hybrid Soft Computing Methods in the Narbaghi Copper Mine [Volume 7, Issue 4, 2024, Pages 41-55]
Ahangari, Kaveh Investigating the correlation between geomechanical factors and the displacement rate of the eastern wall of the Chadormalou iron ore mine using fractal modeling [Volume 6, Issue 1, 2022, Pages 39-50]
Ahangari, Kaveh Optimization of the diverted well path based on the particle swarm optimization method [Volume 6, Issue 2, 2020, Pages 43-51]
Ahangari, Kaveh Formation of crushed zone around tunnel in mechanized excavation of hard rock mass under high stress and its effect on the selection of mechanized drilling machine type [Volume 6, Issue 4, 2023, Pages 19-33]
Ahangari, Kaveh 3D modeling using the finite difference method to determine the effect of geometric and geomechanical parameters of the rock mass on the stability of the final wall slope of the Shadan gold-copper mine [Volume 5, Issue 1, 2021, Pages 67-81]
Ahangari, Kaveh Presenting an experimental model for predicting the blade consumption rate of full-section tunnel boring machines (TBM) [Volume 5, Issue 1, 2021, Pages 1-9]
Ahangari, Kaveh Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
Ahangari, Kaveh The Impact of PowerDeck Application on Blasting Operations - A Case Study of the Sarab Iron Ore Mine [Volume 7, Issue 2, 2023, Pages 39-51]
Ahmadi, Mohammad Hossein Presenting the scaling law using laboratory studies on the Sungun Porphyry (SP) rock type [Volume 5, Issue 2, 2022, Pages 36-42]
Ahmadi, Mohammad Hossein Presenting a micromechanical failure model considering wing crack and secondary crack mechanisms simultaneously under dynamic loading [Volume 5, Issue 2, 2022, Pages 26-35]
Ahmadi, Morteza Comparing the capabilities and efficiency of different methods in predicting tunnel boring machine performance and proposing the best method for presenting the model [Volume 6, Issue 2, 2020, Pages 31-42]
Ahmadi, Morteza Estimating the energy loss ratio in excavation by TBM based on the rock mass behavior model, case study "Second section of Karaj to Tehran water transfer tunnel" [Volume 6, Issue 4, 2023, Pages 45-54]
Ahmadi, Morteza Investigating the effect of mechanized and blasting excavation methods on the extent of damaged zones of circular tunnels [Volume 6, Issue 3, 2021, Pages 32-38]
Ahmadi, Morteza Presenting a relationship for finding the thickness of the damaged area caused by tunneling using laboratory tests and numerical methods [Volume 5, Issue 3, 2022, Pages 33-43]
Ahmadi, Morteza Integrated perimeter surface model of clay and sand based on the concepts of critical state and general dilation law [Volume 5, Issue 4, 2022, Pages 39-52]
Ahmadi, Morteza Experimental Investigation of the Effect of Grain Size on the Mechanical Parameters and Mode I Fracture Toughness of Rock-Like Materials [Volume 8, Issue 2, 2024, Pages 21-34]
Ahmadi, Morteza Investigation of shear behavior of rock sample which have discontinuities system made by 3D printer [Volume 8, Issue 3, 2024, Pages 39-55]
Ajalloeian, Rasoul Modification of RMR Rock Mass Classification System for TBM Performance Prediction in Various Rock Types [Volume 9, Issue 2, 2025, Pages 71-82]
Ajamzadeh, Mohammad Reza Investigating the performance of shearer in long wall method using particle flow code. Case study: Tabas Parvaeh Mechanized Coal Mine [Volume 6, Issue 3, 2021, Pages 39-49]
Akbardoost, Javad Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
Akbardoost, Javad Fracture analysis of rock-type U-notched components using single edge U-notched beam (SEUNB) sample [Volume 8, Issue 1, 2024, Pages 23-36]
Alaei, Reza Numerical study of the effect of rock confinement on tool penetration in punch tests [Volume 5, Issue 2, 2022, Pages 43-53]
Aliabadian, Zeinab Effect of Discrete Fracture Network density on hydraulic fracturing [Volume 8, Issue 3, 2024, Pages 1-10]
Aliabadi Zadeh, Amir Mohammad Investigating the unstable zones of Golgohar No. 3 iron ore mine using radar interferometric method [Volume 9, Issue 1, 2025, Pages 11-23]
Alijani, Farshad Assessment of Empirical and Analytical Methods for the Estimation of Water Intake into the Section 2 of Zagros Tunnel, Kermanshah, West Iran [Volume 9, Issue 3, 2025, Pages 1-21]
Alikhani, Mehdi Machine Learning-Driven Prediction of TBM Penetration Rate in Pyroclastic Formations of the Alborz Mountains, Iran: Integrating LMR, ANN, and C&R Tree Models [(Articles in Press)]
Alilo Kasjini, Yaser Laboratory and numerical investigation of tunnel sections with high ductility concrete (HDC) elements located in squeezing environments [Volume 6, Issue 1, 2022, Pages 63-71]
Alilou Kasjini, Yaser Investigating the Effect of Using Steel Fibers on the Strength Parameters of Concrete [Volume 7, Issue 4, 2024, Pages 57-72]
Alilou Kesejini, Yaser Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
Alinezhadi, Ali Hossein Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
Ameli Ghamsar, ŮŽAida Prediction of penetration rate of EPB TBM machines in soft ground using neuro-fuzzy system (ANFIS) [Volume 7, Issue 2, 2023, Pages 15-27]
Amini, Amirhossein Three-dimensional modeling of stress arching and determination of zones with fracture potential in rock-fill dams in narrow valleys (case study: Lorestan Roodbar dam) [Volume 8, Issue 4, 2025, Pages 1-14]
Amini, Mehdi The Influence of Shear Parameters of Matrix-Blocks Interface on Bimslope Stability [Volume 5, Issue 1, 2021, Pages 10-18]
Aminzadeh, Ali Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
Amiri Hosseini, Mohammad Development of a Mathematical Model for Predicting Blast-Induced Fragmentation Considering Elastic Wave Velocities [Volume 7, Issue 2, 2023, Pages 71-82]
Amirkiyaei, Vahid The correlation between Schmidt hardness index and P-wave velocity with uniaxial compressive strength of carbonate building stones [Volume 5, Issue 1, 2021, Pages 19-28]
Amoun, Sadegh Effect of some important parameters on soil conditioning [Volume 7, Issue 2, 2023, Pages 1-13]
Amoun, Sadegh Laboratory investigation of cutting tool wear of EPB-TBM machine [Volume 6, Issue 4, 2023, Pages 55-62]
Amoun, Sadegh Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Arabnejad, Mohammad Hossein The application of acoustic emission methods in the analysis and evaluation of hydraulic fracturing processes. [Volume 7, Issue 3, 2023, Pages 50-59]
Arash, Mehdi Experimental study on temperature effect on the tensile fracture toughness of cement mortars containing micro-silica [Volume 8, Issue 1, 2024, Pages 51-65]
Arefmand, Ebrahim Investigating the effect of air deck length on fragmentation caused by blasting in Nardaghi limestone mine [Volume 9, Issue 1, 2025, Pages 1-10]
Askarpour Kabir, Ali The effect of freeze-thaw cycles on the fatigue strength of Travertine [Volume 8, Issue 2, 2024, Pages 63-75]
Askarpour Kabir, Ali Validation of numerical simulation of fluid flow through rough rock fractures using physical modeling based on 3D printing [Volume 8, Issue 4, 2025, Pages 53-64]
Aslanzadeh, Mahnaz Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
Ataei, Mohammad Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Ataei, Mohammad Uncertainty quantification in the prediction of the first destruction step in extracting a long wall mining with reliability analysis methods [Volume 5, Issue 2, 2022, Pages 92-102]
Ataeian Dehkordi, Hesamoddin The importance of constitutive models on the accuracy and estimation of deep urban depression deformation [Volume 5, Issue 3, 2022, Pages 21-32]
Atapour, Hadi Comparison of Indirect Tensile Strength Determination Methods for Samples Ranging from Fine-Grained to Coarse-Grained [Volume 9, Issue 3, 2025, Pages 23-39]
Atashzay, Roya Fracture analysis of rock-type U-notched components using single edge U-notched beam (SEUNB) sample [Volume 8, Issue 1, 2024, Pages 23-36]
Azad Sola, Hossein Investigating the feasibility of using basalt powder instead of cement in two-component backfilling grout in mechanized tunneling [(Articles in Press)]
Azhari, Amin Validation of numerical simulation of fluid flow through rough rock fractures using physical modeling based on 3D printing [Volume 8, Issue 4, 2025, Pages 53-64]
Azinfar, Mohammad Javad Study of failure of closed non-extension plane and stepped joints using PFC2D software [Volume 6, Issue 1, 2022, Pages 51-62]
Azinfar, Mohammad Javad Comparing the capabilities and efficiency of different methods in predicting tunnel boring machine performance and proposing the best method for presenting the model [Volume 6, Issue 2, 2020, Pages 31-42]
Azizi, Mohammad Reza Presenting a micromechanical failure model considering wing crack and secondary crack mechanisms simultaneously under dynamic loading [Volume 5, Issue 2, 2022, Pages 26-35]
B
Babanouri, Nima Development of a concentric-membrane cell for true triaxial stress testing of cylindrical rock samples [Volume 8, Issue 2, 2024, Pages 77-88]
Baghbanan, Alireza The Effect of Strength Parameters of Rock Joints on the Scoure Intensity of Stilling Basin behind a Dam [Volume 7, Issue 1, 2023, Pages 1-21]
Baghbanan, Alireza Numerical investigation of flow pattern in a dual permeability environment in the presence of a diagonal fault using the streamline method [Volume 5, Issue 2, 2022, Pages 73-83]
Baghbanan, Alireza The effect of freeze-thaw cycles on the fatigue strength of Travertine [Volume 8, Issue 2, 2024, Pages 63-75]
Baghbanan, Alireza Experimental Investigation of Biological Injection for Enhancing Bearing Capacity of gravel Columns [Volume 8, Issue 2, 2024, Pages 89-99]
Baghbanan, Alireza Validation of numerical simulation of fluid flow through rough rock fractures using physical modeling based on 3D printing [Volume 8, Issue 4, 2025, Pages 53-64]
Bagheripour, Mohammad Hossein Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
Bagherpour, Raheb Predicting pillar stability using gene expression programming algorithm in underground stope and pillar mines [Volume 7, Issue 1, 2023, Pages 107-121]
Bagherpour, Raheb Investigating the relationship between fundamental frequencies produced by rotary drilling and the physical and mechanical properties of carbonate rocks [Volume 5, Issue 2, 2022, Pages 63-72]
Bagherpour, Raheb Acoustic Signal Processing During Drilling and Penetration Rate Analysis for Developing an Empirical Model to Predict the Mechanical Properties of Hard Rocks [Volume 7, Issue 4, 2024, Pages 17-25]
Bahaaddini, Mojtaba Design and optimization of tunnel lining at the intersection of Sardasht water transmission tunnel with the Zirmarg active fault [Volume 7, Issue 4, 2024, Pages 1-15]
Bahaaddini, Mojtaba Application of Numerical Simulation to Estimate Stress Damage Thresholds in Some Types of Sandstones [Volume 8, Issue 1, 2024, Pages 1-21]
Bahrami, Mohammad Experimental and Statistical Evaluation of the Subgrade Reaction Modulus of Clayey Soils from Triaxial Test Results [Volume 9, Issue 2, 2025, Pages 1-16]
Bahramifar, Amir Laboratory and numerical investigation of tunnel sections with high ductility concrete (HDC) elements located in squeezing environments [Volume 6, Issue 1, 2022, Pages 63-71]
Bahramifar, Amir Application of ductile anchors in inverts of hydraulic structures [Volume 6, Issue 4, 2023, Pages 10-18]
Bahramifar, Amir Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
Bakhshandeh Amnieh, Hassan Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
Bakhshandeh Amnieh, Hassan Investigating the performance of data-driven models in determining cement slurry pressure using a combined gamma test and genetic algorithm (GA-GT) method [Volume 5, Issue 4, 2022, Pages 29-38]
Bakhshandeh Amnieh, Hassan Investigating the effect of air deck length on fragmentation caused by blasting in Nardaghi limestone mine [Volume 9, Issue 1, 2025, Pages 1-10]
Bakhtavar, Ezzeddin Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
Bakhtiyari Haftlang, Pedram Numerical modeling of rock cutting using high-pressure water jets [Volume 6, Issue 4, 2023, Pages 34-44]
Bameri, Ali Predicting the Abrasive Resistance of Building Stones Using Regression Models and Random Forest Algorithm [Volume 8, Issue 1, 2024, Pages 67-82]
Bangian Tabrizi, Amir Hossein Three-dimensional effect of leading beam pre-retaining system on ground settlement under conditions of spatial variability of Young's modulus in NATM tunneling (case study) [Volume 5, Issue 4, 2022, Pages 76-88]
Baniasadi Shahrebabaki, ŮŽAbbas Determining the Orientation of Discontinuities Using the Drone Photography (A Case Study of the Bench at the 2450 Level of the West Wall of Sarchesheme Copper Mine [Volume 7, Issue 3, 2023, Pages 15-29]
Barri, Faezeh Investigating the feasibility of using basalt powder instead of cement in two-component backfilling grout in mechanized tunneling [(Articles in Press)]
Basaligheh, Farnoosh Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
Basirat, Rouhollah The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
Bayat, Narges Assessment of Empirical and Analytical Methods for the Estimation of Water Intake into the Section 2 of Zagros Tunnel, Kermanshah, West Iran [Volume 9, Issue 3, 2025, Pages 1-21]
Bazargan, Seyyed Shahab Eddin The Estimation of TBM Penetration Rate using Artificial Neural Network Optimized with Particle Swarm Optimization and Firefly Algorithms, Case Study: Tabriz Metro Line 2 [Volume 9, Issue 1, 2025, Pages 47-60]
Behzadi, Hossein Three-dimensional modeling of stress arching and determination of zones with fracture potential in rock-fill dams in narrow valleys (case study: Lorestan Roodbar dam) [Volume 8, Issue 4, 2025, Pages 1-14]
Bolboli Zare, Maryam Investigating the effect of in-situ stresses on the seismic response of tunnels [Volume 5, Issue 3, 2022, Pages 54-68]
C
Caracos, Morat Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Chakeri, Hamid Laboratory investigation of cutting tool wear of EPB-TBM machine [Volume 6, Issue 4, 2023, Pages 55-62]
Chakeri, Hamid Investigating the uncertainty in the geotechnical profile of the tunnel route and its role in the occurrence of surface settlements [Volume 8, Issue 3, 2024, Pages 85-102]
Chakeri, Hamid The Estimation of TBM Penetration Rate using Artificial Neural Network Optimized with Particle Swarm Optimization and Firefly Algorithms, Case Study: Tabriz Metro Line 2 [Volume 9, Issue 1, 2025, Pages 47-60]
Chakeri, Hamid Investigating the feasibility of using basalt powder instead of cement in two-component backfilling grout in mechanized tunneling [(Articles in Press)]
Chamani, Amin Comparing the capabilities and efficiency of different methods in predicting tunnel boring machine performance and proposing the best method for presenting the model [Volume 6, Issue 2, 2020, Pages 31-42]
Chamanzad, Mohamadali Geomechanical unit Determination using a combination of clustering methods and laboratory test results for the Kangan and Dalan formations in the southern Iranian reservoirs [Volume 7, Issue 3, 2023, Pages 41-49]
Chehrehpak, Mohammad Mehdi Numerical Modeling of Surface Subsidence during Excavation Sequences in the New Austrian Tunneling Method [Volume 7, Issue 1, 2023, Pages 85-106]
Chehrepak, Mohammad Mehdi Numerical Modeling of Evaluation The Stability of The Rock Pillar of The Nakhlak Underground Lead Excavation Network By Sublevel Stoping Method [Volume 7, Issue 4, 2024, Pages 27-39]
Cheshmi, Akbar Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
D
Dadi Givshad, Ali Investigating the effect of mechanized and blasting excavation methods on the extent of damaged zones of circular tunnels [Volume 6, Issue 3, 2021, Pages 32-38]
Dadi Givshad, Ali Presenting a relationship for finding the thickness of the damaged area caused by tunneling using laboratory tests and numerical methods [Volume 5, Issue 3, 2022, Pages 33-43]
Dadkhah Tehrani, Ali Design, construction and implementation of the first in-situ test of a blade dilatometer equipped with a vibration-sensitive electronic sensor on Line 6 of Tehran Metro [Volume 6, Issue 3, 2021, Pages 1-12]
Dalirnasab, Abolfazl Numerical evaluation of the impact of the key layer on the settlement rate caused by mechanized long-wall mining. [Volume 5, Issue 1, 2021, Pages 55-66]
Daraii, Rahman Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
Darbor, Mohammad The Estimation of TBM Penetration Rate using Artificial Neural Network Optimized with Particle Swarm Optimization and Firefly Algorithms, Case Study: Tabriz Metro Line 2 [Volume 9, Issue 1, 2025, Pages 47-60]
Darbor, Mohammad Investigating the feasibility of using basalt powder instead of cement in two-component backfilling grout in mechanized tunneling [(Articles in Press)]
Dardashti, Ameneh Modification of RMR Rock Mass Classification System for TBM Performance Prediction in Various Rock Types [Volume 9, Issue 2, 2025, Pages 71-82]
Dehghan, Alinaghi 3D modeling using the finite difference method to determine the effect of geometric and geomechanical parameters of the rock mass on the stability of the final wall slope of the Shadan gold-copper mine [Volume 5, Issue 1, 2021, Pages 67-81]
Dehghan, Ali Naghi Evaluation of ground settlement caused by tunneling using the staged excavation method in soft soils [Volume 6, Issue 2, 2020, Pages 52-67]
Dehghani, Hesam Investigating the performance of shearer in long wall method using particle flow code. Case study: Tabas Parvaeh Mechanized Coal Mine [Volume 6, Issue 3, 2021, Pages 39-49]
Dehghani, Hesam Effect of Damping and Spacing to Rock Burrow Load Ratio on Rock Crushing Mechanism Using PFC2D and Wipfrog Software [Volume 5, Issue 4, 2022, Pages 20-28]
Dolatshahi, Alireza Experimental study on temperature effect on the tensile fracture toughness of cement mortars containing micro-silica [Volume 8, Issue 1, 2024, Pages 51-65]
Doostan, Ali Experimental Investigation of the Effect of Grain Size on the Mechanical Parameters and Mode I Fracture Toughness of Rock-Like Materials [Volume 8, Issue 2, 2024, Pages 21-34]
Dorodian Movahed, Behrooz Formation of crushed zone around tunnel in mechanized excavation of hard rock mass under high stress and its effect on the selection of mechanized drilling machine type [Volume 6, Issue 4, 2023, Pages 19-33]
E
Eftakhari, Seyed Mosleh Providing a Unified Anisotropic Behavioral Model for Simulating the Behavior of Soft Rocks [Volume 8, Issue 1, 2024, Pages 37-49]
Eftekhari, Seyed Mosleh The Effect of Strength Parameters of Rock Joints on the Scoure Intensity of Stilling Basin behind a Dam [Volume 7, Issue 1, 2023, Pages 1-21]
Eftekhari, Seyed Mosleh Investigating the correlation between geomechanical factors and the displacement rate of the eastern wall of the Chadormalou iron ore mine using fractal modeling [Volume 6, Issue 1, 2022, Pages 39-50]
Eftekhari, Seyed Mosleh Application of Time Series Model to Predict the Penetration Rate of Tunnel Boring Machine [Volume 1, Issue 4, 2016, Pages 63-73]
Eftekhari, Seyed Mosleh The Impact of PowerDeck Application on Blasting Operations - A Case Study of the Sarab Iron Ore Mine [Volume 7, Issue 2, 2023, Pages 39-51]
Eftekhari, Seyed Mosleh Experimental Investigation of the Effect of Grain Size on the Mechanical Parameters and Mode I Fracture Toughness of Rock-Like Materials [Volume 8, Issue 2, 2024, Pages 21-34]
Eftekhari, Seyed Mosleh Assessing the Impact of TBM Operational Parameters on Penetration Rate through Machine Learning and Multi-Stage Feature Selection [Volume 9, Issue 1, 2025, Pages 61-79]
Elmi, Mohsen Determining the Orientation of Discontinuities Using the Drone Photography (A Case Study of the Bench at the 2450 Level of the West Wall of Sarchesheme Copper Mine [Volume 7, Issue 3, 2023, Pages 15-29]
Emami Tabrizi, Mehrdad Laboratory and numerical investigation of tunnel sections with high ductility concrete (HDC) elements located in squeezing environments [Volume 6, Issue 1, 2022, Pages 63-71]
Emami Tabrizi, Mehrdad Application of ductile anchors in inverts of hydraulic structures [Volume 6, Issue 4, 2023, Pages 10-18]
Emami Tabrizi, Mehrdad Comparison of fracture of cracked and non-cracked rounded-corner granular materials under uniaxial compressive loading with lateral confinement [Volume 5, Issue 2, 2022, Pages 1-14]
Emami Tabrizi, Mehrdad Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
Eshghi Gahderijani, Reza Numerical modeling of hydraulic fracturing using ABAQUS finite element software and determining the factors affecting the fracture initiation pressure [Volume 7, Issue 1, 2023, Pages 73-83]
Eshghi ghahderijani, Reza Determining the Optimal Drilling Fluid Pressure for Oil Well Stability Using Geomechanical Modeling in ABAQUS Finite Element Software [Volume 9, Issue 3, 2025, Pages 41-59]
Eslami, Mohamad Machine Learning-Driven Prediction of TBM Penetration Rate in Pyroclastic Formations of the Alborz Mountains, Iran: Integrating LMR, ANN, and C&R Tree Models [(Articles in Press)]
Ezadshenas, Mohammad Softness monitoring: A new approach to evaluating the performance of disc cutters in rock cutting [Volume 5, Issue 2, 2022, Pages 84-91]
F
Fadaei, Pouya 3D modeling using the finite difference method to determine the effect of geometric and geomechanical parameters of the rock mass on the stability of the final wall slope of the Shadan gold-copper mine [Volume 5, Issue 1, 2021, Pages 67-81]
Faghihi Habibabadi, Abolfazl Damage detection in cement mortar samples using wavelet transform analysis of non-destructive ultrasonic test results [Volume 8, Issue 4, 2025, Pages 65-87]
Faghihi Habibabadi, Abolfazl Comparison of Indirect Tensile Strength Determination Methods for Samples Ranging from Fine-Grained to Coarse-Grained [Volume 9, Issue 3, 2025, Pages 23-39]
Fahimifar, Ahmad Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
Fahimifar, Ahmad Simulation of high-velocity rigid projectile penetration into rock mass using discrete element method with particle-flow capability [Volume 5, Issue 3, 2022, Pages 1-12]
Fallahi, Armin Assessing the Impact of TBM Operational Parameters on Penetration Rate through Machine Learning and Multi-Stage Feature Selection [Volume 9, Issue 1, 2025, Pages 61-79]
Faramarzi, Lohrasb Predicting pillar stability using gene expression programming algorithm in underground stope and pillar mines [Volume 7, Issue 1, 2023, Pages 107-121]
Faramarzi, Lohrasb The correlation between Schmidt hardness index and P-wave velocity with uniaxial compressive strength of carbonate building stones [Volume 5, Issue 1, 2021, Pages 19-28]
Farhadian, Ali Investigating the effect of lithological properties of granite building stones on the wear of diamond segments of cutting discs [Volume 6, Issue 2, 2020, Pages 10-18]
Farrokh, Ebrahim Investigating the effect of varying penetration depth, area, and velocity on vertical and rotational forces acting on a V-shaped edge cutting disc [Volume 6, Issue 3, 2021, Pages 13-21]
Farrokh, Ebrahim Prediction of penetration rate of EPB TBM machines in soft ground using neuro-fuzzy system (ANFIS) [Volume 7, Issue 2, 2023, Pages 15-27]
Farrokh, Ebrahim Effect of Operating Parameters on TBM Disc Cutter Wear [Volume 7, Issue 3, 2023, Pages 31-39]
Fatahi Dehkabodi, Shahin Investigating the effect of varying penetration depth, area, and velocity on vertical and rotational forces acting on a V-shaped edge cutting disc [Volume 6, Issue 3, 2021, Pages 13-21]
Fatehi Marji, Mohammad Studying the effect of microparameters of the PFC numerical model on hydraulic crack propagation [Volume 5, Issue 4, 2022, Pages 13-19]
Fatehi Marji, Mohammad Slope stability analysis using a distinct element method considering the effects of fluid flow in open pit mines [Volume 7, Issue 4, 2024, Pages 73-88]
Fatehi Marji, Mohmmad Prediction of Elastic Parameters of Carbonate Reservoir from Well Logging Data Using Machine Learning and Multivariate Regression Methods [Volume 7, Issue 2, 2023, Pages 53-70]
Fatemi, Seyed Amirasad Comparing the capabilities and efficiency of different methods in predicting tunnel boring machine performance and proposing the best method for presenting the model [Volume 6, Issue 2, 2020, Pages 31-42]
Fathipour Azar, Hadi The effect of the mechanical parameter distribution (friction angle) of a discrete fracture network on the strength of the rock mass [Volume 5, Issue 3, 2022, Pages 13-20]
G
Ghaedi Vanani, Ali Asghar Machine Learning-Driven Prediction of TBM Penetration Rate in Pyroclastic Formations of the Alborz Mountains, Iran: Integrating LMR, ANN, and C&R Tree Models [(Articles in Press)]
Ghafarpour Jahromi, Saeed The importance of constitutive models on the accuracy and estimation of deep urban depression deformation [Volume 5, Issue 3, 2022, Pages 21-32]
Ghafouri Moghadam, Mohammad Development of a new method for pattern design and predicting the results of tunnel blasting based on scientific and field parametric studies under V-Cut [Volume 7, Issue 1, 2023, Pages 45-71]
Ghamari mood, Anahid The Effect of Strength Parameters of Rock Joints on the Scoure Intensity of Stilling Basin behind a Dam [Volume 7, Issue 1, 2023, Pages 1-21]
Ghanavati Nasab, Mehdi Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
Ghasemi, Ebrahim Investigating the effect of lithological properties of granite building stones on the wear of diamond segments of cutting discs [Volume 6, Issue 2, 2020, Pages 10-18]
Ghasemi, Ebrahim Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
Ghasemi, Ebrahim The correlation between Schmidt hardness index and P-wave velocity with uniaxial compressive strength of carbonate building stones [Volume 5, Issue 1, 2021, Pages 19-28]
Ghasemi, Ebrahim Predicting the Abrasive Resistance of Building Stones Using Regression Models and Random Forest Algorithm [Volume 8, Issue 1, 2024, Pages 67-82]
Ghasemzadeh, Hassan Investigation of the mechanical behavior of basalt samples with cracks of different numbers and angles under uniaxial compressive stress [Volume 1, Issue 4, 2016, Pages 1-9]
Ghavami, Sina Investigating the effect of lithological properties of granite building stones on the wear of diamond segments of cutting discs [Volume 6, Issue 2, 2020, Pages 10-18]
Ghazvinian, Abodlhadi Effect of Loading Rate on the Failure Mechanism of Rocks under Indirect Tensile Loading [Volume 1, Issue 2, 2017, Pages 55-65]
Gheybi, MirJavad Investigating the unstable zones of Golgohar No. 3 iron ore mine using radar interferometric method [Volume 9, Issue 1, 2025, Pages 11-23]
Ghobadi, Behnam Providing a Unified Anisotropic Behavioral Model for Simulating the Behavior of Soft Rocks [Volume 8, Issue 1, 2024, Pages 37-49]
Gholamhoseinpour, Ali Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
Gholamrezazadeh, Vahid Evaluation of Pipe Bursting operation on Adjacent Underground facilities Using 3D Numerical Analysis [Volume 8, Issue 4, 2025, Pages 89-99]
Ghorbani, Sasan Determining the Optimal Direction of Grout Injection Holes in the Cut Off Curtain of Safarood Dam Using Combination of Hydraulic Conductivity Tensor and Lugeon Test [Volume 9, Issue 2, 2025, Pages 43-69]
Ghorbani, Sasan Development of an Adaptive Neuro-Fuzzy Inference System (ANFIS) for Intelligent Prediction of Tunnel Settlement and Evaluation of Predictive Accuracy Based on Convergence Monitoring Data [Volume 9, Issue 3, 2025, Pages 61-79]
Ghorbanpour, Vahid Comparison of fracture of cracked and non-cracked rounded-corner granular materials under uniaxial compressive loading with lateral confinement [Volume 5, Issue 2, 2022, Pages 1-14]
Ghoreishian Amiri, Seyed Ali Integrated perimeter surface model of clay and sand based on the concepts of critical state and general dilation law [Volume 5, Issue 4, 2022, Pages 39-52]
Ghoreishian Amiri, Seyed Ali Providing a Unified Anisotropic Behavioral Model for Simulating the Behavior of Soft Rocks [Volume 8, Issue 1, 2024, Pages 37-49]
Ghyasvand, Soheil Optimal selection of stability system for railway tunnel improvement [Volume 5, Issue 4, 2022, Pages 1-12]
Goshtasbi, Kamran Numerical investigation of the effect of cross-sectional area and stress intensity on the development of damage zone around tunnels in hard rock mass [Volume 6, Issue 1, 2022, Pages 15-30]
Goshtasbi, Kamran The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
Goshtasbi, Kamran Experimental Study on the Performance of Chisel Tools in Cutting Weak to Moderate Rocks [Volume 5, Issue 1, 2021, Pages 29-41]
Goshtasbi, Kamran Presenting an experimental model for predicting the blade consumption rate of full-section tunnel boring machines (TBM) [Volume 5, Issue 1, 2021, Pages 1-9]
Goshtasbi, Kamran Investigating the effect of in-situ stresses on the seismic response of tunnels [Volume 5, Issue 3, 2022, Pages 54-68]
Goshtasbi, Kamran Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
H
Hadei, Mir Raouf Numerical modeling of the coarse crack fracture mechanism in disk specimens [Volume 5, Issue 3, 2022, Pages 44-53]
Hadei, Mir Raouf Stability analysis of the slopes upstream and downstream of the road overlooking the Haraz Dam [Volume 5, Issue 3, 2022, Pages 69-89]
Hadei, Mir Raouf Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
Hadei, Mir Raouf Numerical Modeling of the Pipe Roofing System for Tunnel Pre-Treatment (Case Study: Taleghan Tunnel) [Volume 8, Issue 1, 2024, Pages 83-97]
Haeri, Hadi Studying the effect of microparameters of the PFC numerical model on hydraulic crack propagation [Volume 5, Issue 4, 2022, Pages 13-19]
Haeri, Hadi Experimental and Numerical Investigation of Conventional Methods for Determining Mode I Fracture Toughness of Concrete [Volume 9, Issue 1, 2025, Pages 25-45]
Haghnejad, Ali Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
Haidari, Mojtaba Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Hajizadeh, Armita Modeling the Behavior of Frozen Soil Under Freeze/Thaw Cycles with Emphasis on Depth and Temperature Change Rate Parameters [Volume 9, Issue 2, 2025, Pages 29-41]
Hasani, Saeed The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2016, Pages 35-49]
Hashemolhesseini, Hamid Numerical investigation of flow pattern in a dual permeability environment in the presence of a diagonal fault using the streamline method [Volume 5, Issue 2, 2022, Pages 73-83]
Hashemolhosseini, Hamid The effect of freeze-thaw cycles on the fatigue strength of Travertine [Volume 8, Issue 2, 2024, Pages 63-75]
Hassanpour, Jafar Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
Hassanpour, Jafar Modification of RMR Rock Mass Classification System for TBM Performance Prediction in Various Rock Types [Volume 9, Issue 2, 2025, Pages 71-82]
Hassanpour, Jafar Machine Learning-Driven Prediction of TBM Penetration Rate in Pyroclastic Formations of the Alborz Mountains, Iran: Integrating LMR, ANN, and C&R Tree Models [(Articles in Press)]
Hassanpour, Jafar Analysis of the Effects of Fault Zones on the Boreability Index and TBM Performance in Tunneling Projects (Case Study: Karaj, Ghmroud, Nowsoud, and Kerman Water Conveyance Tunnels) [Volume 9, Issue 3, 2025, Pages 81-96]
Hayati, Mohammad Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2016, Pages 85-95]
Hayati, Mohammad Managing risk in tunneling projects: A fuzzy TOPSIS approach for improved decision-making [Volume 9, Issue 1, 2025, Pages 81-95]
Hedayati, Mohsen Development of a concentric-membrane cell for true triaxial stress testing of cylindrical rock samples [Volume 8, Issue 2, 2024, Pages 77-88]
Heidari, Majid Modeling the dynamic behavior of the rock foundation of the Moshampa Dam [Volume 5, Issue 1, 2021, Pages 42-54]
Heidari, Mojtaba The effect of rock chipping on the penetration rate of tunnel boring machine [Volume 7, Issue 1, 2023, Pages 23-43]
Heidari, Mojtaba Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2016, Pages 51-61]
Heidari, Rasoul Study of the stability of the diverted well wall using a quantitative risk assessment method in one of the fields in southwestern Iran [Volume 5, Issue 2, 2022, Pages 54-62]
Hossaini, Mohammad Farouq The Influence of Shear Parameters of Matrix-Blocks Interface on Bimslope Stability [Volume 5, Issue 1, 2021, Pages 10-18]
Hossaini, Mohammad Farouq Investigation of the mechanical behavior of basalt samples with cracks of different numbers and angles under uniaxial compressive stress [Volume 1, Issue 4, 2016, Pages 1-9]
Hosseini, Mehdi Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
I
Imani, Mehrdad Investigating the effect of heterogeneity on the fracture mechanism of rock samples [Volume 6, Issue 3, 2021, Pages 22-31]
J
Jafarnejad Qarahasanlou, Ehsan Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Jafar Shirzad, Peyman Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Jafar Shirzad, Peyman Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
Jalali, Seyed Hossein Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2016, Pages 51-61]
Jalali, Seyed Mohammad Esmaeil Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
Jalali, Seyed Mohammad Esmaeil The effect of the mechanical parameter distribution (friction angle) of a discrete fracture network on the strength of the rock mass [Volume 5, Issue 3, 2022, Pages 13-20]
Jalalian, Mohammad Hossein Investigating the relationship between fundamental frequencies produced by rotary drilling and the physical and mechanical properties of carbonate rocks [Volume 5, Issue 2, 2022, Pages 63-72]
Jalalian, Mohammad Hossein Acoustic Signal Processing During Drilling and Penetration Rate Analysis for Developing an Empirical Model to Predict the Mechanical Properties of Hard Rocks [Volume 7, Issue 4, 2024, Pages 17-25]
Jalalifar, Hossein Study of the stability of the diverted well wall using a quantitative risk assessment method in one of the fields in southwestern Iran [Volume 5, Issue 2, 2022, Pages 54-62]
Jalalifar, Hossein Development of a new model to predict the shear strength of unfilled natural joints [Volume 8, Issue 3, 2024, Pages 103-110]
Jalili Kashtian, Yavar Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Jannesary, Saeed Investigating the effect of air deck length on fragmentation caused by blasting in Nardaghi limestone mine [Volume 9, Issue 1, 2025, Pages 1-10]
Javadi, Morteza Development of a geometric model of a 3D fractal discrete fracture network for tunnel sealing design selection [Volume 9, Issue 2, 2025, Pages 83-99]
Jenabi, Amir Hossein Optimization of the diverted well path based on the particle swarm optimization method [Volume 6, Issue 2, 2020, Pages 43-51]
K
Kadkhodaei, Mohammad Hossein Predicting pillar stability using gene expression programming algorithm in underground stope and pillar mines [Volume 7, Issue 1, 2023, Pages 107-121]
Kalantari, Sajad The role of operational factors in estimating rock strength parameters using micro drilling method [Volume 6, Issue 2, 2020, Pages 19-30]
Kalantari Mazraeno, Ali Investigating the uncertainty in the geotechnical profile of the tunnel route and its role in the occurrence of surface settlements [Volume 8, Issue 3, 2024, Pages 85-102]
Kararri, Seyed Sajjad The effect of rock chipping on the penetration rate of tunnel boring machine [Volume 7, Issue 1, 2023, Pages 23-43]
Karbala, Mohammad Mehdi Integrated IPM modeling to investigate formation particle control methods in oil reservoirs [Volume 6, Issue 4, 2023, Pages 1-9]
Kargar, Ali Reza Three-dimensional modeling of stress arching and determination of zones with fracture potential in rock-fill dams in narrow valleys (case study: Lorestan Roodbar dam) [Volume 8, Issue 4, 2025, Pages 1-14]
Karimi Ansari, Hossein The Estimation of TBM Penetration Rate using Artificial Neural Network Optimized with Particle Swarm Optimization and Firefly Algorithms, Case Study: Tabriz Metro Line 2 [Volume 9, Issue 1, 2025, Pages 47-60]
Karimi Googheri, Hediyeh Experimental Investigation of Biological Injection for Enhancing Bearing Capacity of gravel Columns [Volume 8, Issue 2, 2024, Pages 89-99]
Karimi Nasab, Saeed Development of a new model to predict the shear strength of unfilled natural joints [Volume 8, Issue 3, 2024, Pages 103-110]
Kasravi, Javad Study of the stability of the diverted well wall using a quantitative risk assessment method in one of the fields in southwestern Iran [Volume 5, Issue 2, 2022, Pages 54-62]
Keshavarz, Behnam Numerical Modeling of the Pipe Roofing System for Tunnel Pre-Treatment (Case Study: Taleghan Tunnel) [Volume 8, Issue 1, 2024, Pages 83-97]
Keyhani, Ali Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
Khademi Hamidi, Jafar Experimental Study on the Performance of Chisel Tools in Cutting Weak to Moderate Rocks [Volume 5, Issue 1, 2021, Pages 29-41]
Khademi Hamidi, Jafar Presenting an experimental model for predicting the blade consumption rate of full-section tunnel boring machines (TBM) [Volume 5, Issue 1, 2021, Pages 1-9]
Khademi Hamidi, Jafar Numerical study of the effect of rock confinement on tool penetration in punch tests [Volume 5, Issue 2, 2022, Pages 43-53]
Khademi Hamidi, Jafar Softness monitoring: A new approach to evaluating the performance of disc cutters in rock cutting [Volume 5, Issue 2, 2022, Pages 84-91]
Khademi Hamidi, Jafar Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
Khademi Hamidi, Jafar Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
Khalifegholi, Masoud Predicting pillar stability using gene expression programming algorithm in underground stope and pillar mines [Volume 7, Issue 1, 2023, Pages 107-121]
Khalo Kakaei, Reza Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
Khandoozi, Ghorban Selecting the optimal excavation method for the Zarrin Ardakan Yazd railway tunnel using the ELECTRE multi-criteria decision-making method [Volume 5, Issue 2, 2022, Pages 15-25]
Khani, Jafar Development of a new method for pattern design and predicting the results of tunnel blasting based on scientific and field parametric studies under V-Cut [Volume 7, Issue 1, 2023, Pages 45-71]
Khani, Jafar Investigating the Effect of Using Steel Fibers on the Strength Parameters of Concrete [Volume 7, Issue 4, 2024, Pages 57-72]
Khanlari, Gholamreza Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Khanlari, Gholamreza Application of Numerical Simulation to Estimate Stress Damage Thresholds in Some Types of Sandstones [Volume 8, Issue 1, 2024, Pages 1-21]
Khorasani, Emad The Influence of Shear Parameters of Matrix-Blocks Interface on Bimslope Stability [Volume 5, Issue 1, 2021, Pages 10-18]
Khoshkharam, Shafie Numerical investigation of the effect of cross-sectional area and stress intensity on the development of damage zone around tunnels in hard rock mass [Volume 6, Issue 1, 2022, Pages 15-30]
Khoshouei, Mehrbod Acoustic Signal Processing During Drilling and Penetration Rate Analysis for Developing an Empirical Model to Predict the Mechanical Properties of Hard Rocks [Volume 7, Issue 4, 2024, Pages 17-25]
Khoshouei Esfahani, Mehrbod Investigating the relationship between fundamental frequencies produced by rotary drilling and the physical and mechanical properties of carbonate rocks [Volume 5, Issue 2, 2022, Pages 63-72]
Khosravi, Fereydon Investigating the Effect of Using Steel Fibers on the Strength Parameters of Concrete [Volume 7, Issue 4, 2024, Pages 57-72]
Khosravi, Mohammad Hossein An analytical method based on stress arching theory for stabilization of soil slopes using a single row of piles [Volume 8, Issue 4, 2025, Pages 15-25]
Khosravi, Mohammad Hossein Three-dimensional modeling of stress arching and determination of zones with fracture potential in rock-fill dams in narrow valleys (case study: Lorestan Roodbar dam) [Volume 8, Issue 4, 2025, Pages 1-14]
Khosravi, Morteza Development of drillability index of jointed rock mass based on rock fracture index in drilling with TBM [Volume 5, Issue 3, 2022, Pages 90-104]
L
Lajevardi, Seyed Hamid Evaluation of ground settlement caused by tunneling using the staged excavation method in soft soils [Volume 6, Issue 2, 2020, Pages 52-67]
Lotfi, Omid Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
M
Maarefvand, Parvizz Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
Maarefvand, Parvizz Effect of Operating Parameters on TBM Disc Cutter Wear [Volume 7, Issue 3, 2023, Pages 31-39]
Madavi Aznavele, Fatemeh Experimental Investigation of Biological Injection for Enhancing Bearing Capacity of gravel Columns [Volume 8, Issue 2, 2024, Pages 89-99]
Mahdevari, Satar Numerical Modeling of Surface Subsidence during Excavation Sequences in the New Austrian Tunneling Method [Volume 7, Issue 1, 2023, Pages 85-106]
Mahdevari, Satar Numerical modeling of rock cutting using high-pressure water jets [Volume 6, Issue 4, 2023, Pages 34-44]
Mahdevari, Satar Experimental Study of the Mechanical Properties of Artificial Stones with the Aim of Determining the Optimal Composition of Constituent Materials [Volume 7, Issue 2, 2023, Pages 29-38]
Mahdevari, Satar Numerical Modeling of the Stability of Intersection Resulted from Slope Tunnel and Access Tunnel in Tabas Coal Mine [Volume 7, Issue 3, 2023, Pages 1-13]
Mahdizadeh, Mahdi Investigating the correlation between geomechanical factors and the displacement rate of the eastern wall of the Chadormalou iron ore mine using fractal modeling [Volume 6, Issue 1, 2022, Pages 39-50]
Mahmoodjanloo, Mahdi Development of an Adaptive Neuro-Fuzzy Inference System (ANFIS) for Intelligent Prediction of Tunnel Settlement and Evaluation of Predictive Accuracy Based on Convergence Monitoring Data [Volume 9, Issue 3, 2025, Pages 61-79]
Mahmoodzadeh, Arsalan Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
Majdi, Abbas Prediction of maximum ground surface Subsidence due to longwall mining: a comparative evaluation of empirical equations and statistical and artificial intelligence models [Volume 8, Issue 3, 2024, Pages 11-37]
Majdi, Abbas Prediction of maximum ground surface subsidence induced by longwall mining using a hybrid support vector regression model optimized by golden eagle algorithm [Volume 8, Issue 4, 2025, Pages 27-51]
Majdi, Abbas Investigating the effect of air deck length on fragmentation caused by blasting in Nardaghi limestone mine [Volume 9, Issue 1, 2025, Pages 1-10]
Mashayekhi, Mohammad Mehdi Experimental study on temperature effect on the tensile fracture toughness of cement mortars containing micro-silica [Volume 8, Issue 1, 2024, Pages 51-65]
Masoudi, Majid Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
Matinpour, Fariborz Prediction of maximum ground surface Subsidence due to longwall mining: a comparative evaluation of empirical equations and statistical and artificial intelligence models [Volume 8, Issue 3, 2024, Pages 11-37]
Matinpour, Fariborz Prediction of maximum ground surface settlement due to urban tunneling operations using GEP and MEP evolutionary algorithms [Volume 8, Issue 3, 2024, Pages 57-83]
Matinpour, Fariborz Prediction of maximum ground surface subsidence induced by longwall mining using a hybrid support vector regression model optimized by golden eagle algorithm [Volume 8, Issue 4, 2025, Pages 27-51]
Mazhabi, Masoud Application of Time Series Model to Predict the Penetration Rate of Tunnel Boring Machine [Volume 1, Issue 4, 2016, Pages 63-73]
Mikaeil, Reza Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Mikaeil, Reza Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
Mikaeil, Reza Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
Mikaeil, Reza The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2016, Pages 35-49]
Mikhak Beiralvand, Nasrin Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
Mirahmadi, Majid Estimating the energy loss ratio in excavation by TBM based on the rock mass behavior model, case study "Second section of Karaj to Tehran water transfer tunnel" [Volume 6, Issue 4, 2023, Pages 45-54]
Mirzabeigi, Sina Validation of numerical simulation of fluid flow through rough rock fractures using physical modeling based on 3D printing [Volume 8, Issue 4, 2025, Pages 53-64]
Mirzaei, Hossein Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Mirzaei, Hossein Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
Mirzaei, Rahman The Estimation of TBM Penetration Rate using Artificial Neural Network Optimized with Particle Swarm Optimization and Firefly Algorithms, Case Study: Tabriz Metro Line 2 [Volume 9, Issue 1, 2025, Pages 47-60]
Moghadam, Seyed Iman Integrated perimeter surface model of clay and sand based on the concepts of critical state and general dilation law [Volume 5, Issue 4, 2022, Pages 39-52]
Moghadas Nejad, Fereidoon Optimal selection of stability system for railway tunnel improvement [Volume 5, Issue 4, 2022, Pages 1-12]
Moghbeli, Armin Numerical Analysis of Tunnel Deformation Behavior and Surface Settlement in Layered Clayey Soils with Emphasis on the Cover-to-Diameter Ratio [Volume 9, Issue 3, 2025, Pages 97-116]
Mohammadi, Mehdi Development of a new method for pattern design and predicting the results of tunnel blasting based on scientific and field parametric studies under V-Cut [Volume 7, Issue 1, 2023, Pages 45-71]
Mohammadi, Mehdi Numerical study of the effect of rock confinement on tool penetration in punch tests [Volume 5, Issue 2, 2022, Pages 43-53]
Mohammadi, Mehdi Determining the Orientation of Discontinuities Using the Drone Photography (A Case Study of the Bench at the 2450 Level of the West Wall of Sarchesheme Copper Mine [Volume 7, Issue 3, 2023, Pages 15-29]
Mohammadi, Reza Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
Mohammadi, Sajad Uncertainty quantification in the prediction of the first destruction step in extracting a long wall mining with reliability analysis methods [Volume 5, Issue 2, 2022, Pages 92-102]
Mohammadi Bolbanabad, Shadman Prediction of maximum ground surface settlement due to urban tunneling operations using GEP and MEP evolutionary algorithms [Volume 8, Issue 3, 2024, Pages 57-83]
Mohammadi Firooz, Farshad Design and optimization of tunnel lining at the intersection of Sardasht water transmission tunnel with the Zirmarg active fault [Volume 7, Issue 4, 2024, Pages 1-15]
Mohammadi Hosseinabadi, Mehdi Experimental Study on the Performance of Chisel Tools in Cutting Weak to Moderate Rocks [Volume 5, Issue 1, 2021, Pages 29-41]
Mohammadrezaei, Hasan Determining the Orientation of Discontinuities Using the Drone Photography (A Case Study of the Bench at the 2450 Level of the West Wall of Sarchesheme Copper Mine [Volume 7, Issue 3, 2023, Pages 15-29]
Mohammadyari, Zohreh Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
Mohseni, Hassan Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2016, Pages 51-61]
Mohseniafkham, Reza Comparison of Indirect Tensile Strength Determination Methods for Samples Ranging from Fine-Grained to Coarse-Grained [Volume 9, Issue 3, 2025, Pages 23-39]
Mokhtarzadeh, Mohammad Hossein Evaluation of the Mechanical Properties of Cement Mortar Containing Expanded Vermiculite Aggregate [Volume 8, Issue 2, 2024, Pages 1-19]
Molashahi, Mohsen Selecting the optimal excavation method for the Zarrin Ardakan Yazd railway tunnel using the ELECTRE multi-criteria decision-making method [Volume 5, Issue 2, 2022, Pages 15-25]
Molladavoodi, Hamed Presenting the scaling law using laboratory studies on the Sungun Porphyry (SP) rock type [Volume 5, Issue 2, 2022, Pages 36-42]
Molladavoodi, Hamed Presenting a micromechanical failure model considering wing crack and secondary crack mechanisms simultaneously under dynamic loading [Volume 5, Issue 2, 2022, Pages 26-35]
Molladavoodi, Hamed Numerical Modeling of Evaluation The Stability of The Rock Pillar of The Nakhlak Underground Lead Excavation Network By Sublevel Stoping Method [Volume 7, Issue 4, 2024, Pages 27-39]
Molladavoodi, Hamed Experimental study on temperature effect on the tensile fracture toughness of cement mortars containing micro-silica [Volume 8, Issue 1, 2024, Pages 51-65]
Molladavoodi, Hamed Damage detection in cement mortar samples using wavelet transform analysis of non-destructive ultrasonic test results [Volume 8, Issue 4, 2025, Pages 65-87]
Monjezi, Masoud Development of a Mathematical Model for Predicting Blast-Induced Fragmentation Considering Elastic Wave Velocities [Volume 7, Issue 2, 2023, Pages 71-82]
Monjezi, Masoud Prediction and Optimization of Rock Fragmentation Induced by Blasting Using Hybrid Soft Computing Methods in the Narbaghi Copper Mine [Volume 7, Issue 4, 2024, Pages 41-55]
Monjezi, Masoud Managing risk in tunneling projects: A fuzzy TOPSIS approach for improved decision-making [Volume 9, Issue 1, 2025, Pages 81-95]
Moodsvi, Seyed Amin Integrated IPM modeling to investigate formation particle control methods in oil reservoirs [Volume 6, Issue 4, 2023, Pages 1-9]
Moomeni, Ali Akbar Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Moosavi, Ehsan Experimental and numerical analysis to evaluate the effect of core geometry and size on the uniaxial compressive strength of concrete [Volume 5, Issue 4, 2022, Pages 63-75]
Moosavi, Ehsan Three-dimensional effect of leading beam pre-retaining system on ground settlement under conditions of spatial variability of Young's modulus in NATM tunneling (case study) [Volume 5, Issue 4, 2022, Pages 76-88]
Moosavi, Mehdi Comparison of Facture Toughness Values in Single Edge Crack Round Bar Bending Test (SECRBB) and Straight Notch Disk Bend Test (SNDB) for Basalt Rocks [Volume 1, Issue 2, 2017, Pages 1-8]
Moosavi, Seyed Amin Effect of some important parameters on soil conditioning [Volume 7, Issue 2, 2023, Pages 1-13]
Moosavi, Seyed Amin Numerical Modeling of the Pipe Roofing System for Tunnel Pre-Treatment (Case Study: Taleghan Tunnel) [Volume 8, Issue 1, 2024, Pages 83-97]
Moosavi, Seyed Ehsan Investigating the performance of data-driven models in determining cement slurry pressure using a combined gamma test and genetic algorithm (GA-GT) method [Volume 5, Issue 4, 2022, Pages 29-38]
Morsali, Masoud Complementing the SGR method with real data in estimating water inflow into rock tunnels [Volume 5, Issue 4, 2022, Pages 53-62]
Mortezapour, Mehdi Experimental Study of the Mechanical Properties of Artificial Stones with the Aim of Determining the Optimal Composition of Constituent Materials [Volume 7, Issue 2, 2023, Pages 29-38]
Mostafavi, Imandokht Geomechanical unit Determination using a combination of clustering methods and laboratory test results for the Kangan and Dalan formations in the southern Iranian reservoirs [Volume 7, Issue 3, 2023, Pages 41-49]
N
Naderi, Mahmood In-situ evaluation of compressive strength of rocks and repair mortars using the "torsion" method [Volume 6, Issue 1, 2022, Pages 31-38]
Naderi, Mahmood Application of a new test for in-situ measurement of uniaxial compressive strength of rocks and concrete [Volume 6, Issue 3, 2021, Pages 50-57]
Najafi, Mehdi Numerical evaluation of the impact of the key layer on the settlement rate caused by mechanized long-wall mining. [Volume 5, Issue 1, 2021, Pages 55-66]
Namdari, Sajad Numerical investigation of flow pattern in a dual permeability environment in the presence of a diagonal fault using the streamline method [Volume 5, Issue 2, 2022, Pages 73-83]
Nasri Fakhr Davood, Mohammad Javad Estimation of fluid flow behavior pattern in rock mass in Chamshir Dam [Volume 6, Issue 2, 2020, Pages 1-9]
Nassery, HamidReza Assessment of Empirical and Analytical Methods for the Estimation of Water Intake into the Section 2 of Zagros Tunnel, Kermanshah, West Iran [Volume 9, Issue 3, 2025, Pages 1-21]
Nejati, Hamidreza Investigation of shear behavior of rock sample which have discontinuities system made by 3D printer [Volume 8, Issue 3, 2024, Pages 39-55]
Nejati, Hamid Reza Numerical investigation of the effect of cross-sectional area and stress intensity on the development of damage zone around tunnels in hard rock mass [Volume 6, Issue 1, 2022, Pages 15-30]
Nejati, Hamid Reza Integrated IPM modeling to investigate formation particle control methods in oil reservoirs [Volume 6, Issue 4, 2023, Pages 1-9]
Nejati, Hamid Reza Investigating the effect of mechanized and blasting excavation methods on the extent of damaged zones of circular tunnels [Volume 6, Issue 3, 2021, Pages 32-38]
Nejati, Hamid Reza Investigating the effect of heterogeneity on the fracture mechanism of rock samples [Volume 6, Issue 3, 2021, Pages 22-31]
Nejati, Hamid Reza Investigating the effect of in-situ stresses on the seismic response of tunnels [Volume 5, Issue 3, 2022, Pages 54-68]
Nejati, Hamid Reza Presenting a relationship for finding the thickness of the damaged area caused by tunneling using laboratory tests and numerical methods [Volume 5, Issue 3, 2022, Pages 33-43]
Nejati, Hamid Reza Effect of Loading Rate on the Failure Mechanism of Rocks under Indirect Tensile Loading [Volume 1, Issue 2, 2017, Pages 55-65]
Nejati, Hamid Reza Application of Numerical Simulation to Estimate Stress Damage Thresholds in Some Types of Sandstones [Volume 8, Issue 1, 2024, Pages 1-21]
Nikbakht Nasrabadi, Reza Effect of Operating Parameters on TBM Disc Cutter Wear [Volume 7, Issue 3, 2023, Pages 31-39]
Nikbin, Rouzbeh Acoustic Signal Processing During Drilling and Penetration Rate Analysis for Developing an Empirical Model to Predict the Mechanical Properties of Hard Rocks [Volume 7, Issue 4, 2024, Pages 17-25]
Nikkhah, Majid Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
Nikkhah, Majid Geomechanical unit Determination using a combination of clustering methods and laboratory test results for the Kangan and Dalan formations in the southern Iranian reservoirs [Volume 7, Issue 3, 2023, Pages 41-49]
Noori, Mehran Application of Numerical Simulation to Estimate Stress Damage Thresholds in Some Types of Sandstones [Volume 8, Issue 1, 2024, Pages 1-21]
Noorian-Bidgoli, Majid Experimental and Numerical Investigation of Conventional Methods for Determining Mode I Fracture Toughness of Concrete [Volume 9, Issue 1, 2025, Pages 25-45]
Noroozi, Mehdi Numerical evaluation of the impact of the key layer on the settlement rate caused by mechanized long-wall mining. [Volume 5, Issue 1, 2021, Pages 55-66]
Nourzad, Ali Formation of crushed zone around tunnel in mechanized excavation of hard rock mass under high stress and its effect on the selection of mechanized drilling machine type [Volume 6, Issue 4, 2023, Pages 19-33]
P
Pakdaman, Ali Mohammad Comparison of Facture Toughness Values in Single Edge Crack Round Bar Bending Test (SECRBB) and Straight Notch Disk Bend Test (SNDB) for Basalt Rocks [Volume 1, Issue 2, 2017, Pages 1-8]
Pezeshki, Misha Geomechanical unit Determination using a combination of clustering methods and laboratory test results for the Kangan and Dalan formations in the southern Iranian reservoirs [Volume 7, Issue 3, 2023, Pages 41-49]
Pourazar, Samrand Numerical modeling of the coarse crack fracture mechanism in disk specimens [Volume 5, Issue 3, 2022, Pages 44-53]
R
Rafiei, Behrouz Application of Numerical Simulation to Estimate Stress Damage Thresholds in Some Types of Sandstones [Volume 8, Issue 1, 2024, Pages 1-21]
Rahimi, Esmaeil Three-dimensional effect of leading beam pre-retaining system on ground settlement under conditions of spatial variability of Young's modulus in NATM tunneling (case study) [Volume 5, Issue 4, 2022, Pages 76-88]
Rahimi, Morteza Modeling the dynamic behavior of the rock foundation of the Moshampa Dam [Volume 5, Issue 1, 2021, Pages 42-54]
Rahimi Dizaji, Morteza Simulation of high-velocity rigid projectile penetration into rock mass using discrete element method with particle-flow capability [Volume 5, Issue 3, 2022, Pages 1-12]
Rahimi Dizaji, Morteza Stability analysis of the slopes upstream and downstream of the road overlooking the Haraz Dam [Volume 5, Issue 3, 2022, Pages 69-89]
Rahmani Shahraki, Ahmad The effect of freeze-thaw cycles on the fatigue strength of Travertine [Volume 8, Issue 2, 2024, Pages 63-75]
Rahmani Shahraki, Ahmad Validation of numerical simulation of fluid flow through rough rock fractures using physical modeling based on 3D printing [Volume 8, Issue 4, 2025, Pages 53-64]
Rahmannejad, Reza Design and optimization of tunnel lining at the intersection of Sardasht water transmission tunnel with the Zirmarg active fault [Volume 7, Issue 4, 2024, Pages 1-15]
Rahman Nejad, Reza Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
Rahman Nejad, Reza Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
Rajaei Moghaddam, Nahid Experimental and Statistical Evaluation of the Subgrade Reaction Modulus of Clayey Soils from Triaxial Test Results [Volume 9, Issue 2, 2025, Pages 1-16]
Ramezanzadeh, Ahmad Development of drillability index of jointed rock mass based on rock fracture index in drilling with TBM [Volume 5, Issue 3, 2022, Pages 90-104]
Ramezanzadeh, Ahmad Geomechanical unit Determination using a combination of clustering methods and laboratory test results for the Kangan and Dalan formations in the southern Iranian reservoirs [Volume 7, Issue 3, 2023, Pages 41-49]
Ranjineh Khojasteh, Enayatollah Investigating the uncertainty in the geotechnical profile of the tunnel route and its role in the occurrence of surface settlements [Volume 8, Issue 3, 2024, Pages 85-102]
Rashiddel, Alireza Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
Rashvand Aveh, Abolfazl In-situ evaluation of compressive strength of rocks and repair mortars using the "torsion" method [Volume 6, Issue 1, 2022, Pages 31-38]
Rastin, Amir Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
Refahi, Arash Modeling the dynamic behavior of the rock foundation of the Moshampa Dam [Volume 5, Issue 1, 2021, Pages 42-54]
Rezaei, Ali Investigating the effect of lithological properties of granite building stones on the wear of diamond segments of cutting discs [Volume 6, Issue 2, 2020, Pages 10-18]
Rezaei, Mohammad Estimating the rock mass deformation modulus using the statistical and artificial intelligence models [Volume 8, Issue 2, 2024, Pages 35-62]
Rezaei, Mohammad Prediction of maximum ground surface settlement due to urban tunneling operations using GEP and MEP evolutionary algorithms [Volume 8, Issue 3, 2024, Pages 57-83]
Rezaei, Seyfoldin Investigating the Effect of Using Steel Fibers on the Strength Parameters of Concrete [Volume 7, Issue 4, 2024, Pages 57-72]
Rezakhah, Mojtaba Development of a Mathematical Model for Predicting Blast-Induced Fragmentation Considering Elastic Wave Velocities [Volume 7, Issue 2, 2023, Pages 71-82]
Rezakhah, Mojtaba Prediction and Optimization of Rock Fragmentation Induced by Blasting Using Hybrid Soft Computing Methods in the Narbaghi Copper Mine [Volume 7, Issue 4, 2024, Pages 41-55]
Rezakhah, Mojtaba Managing risk in tunneling projects: A fuzzy TOPSIS approach for improved decision-making [Volume 9, Issue 1, 2025, Pages 81-95]
Rezakhah, Mojtaba Optimizing Blast-Induced Ground Vibration Reduction Using an Integrated ANN-EOA Model: A Case Study of Sarcheshmeh Copper Mine [Volume 9, Issue 2, 2025, Pages 17-27]
Roshan, Omid The effect of plastic strains on the deformation of oil reservoirs [Volume 6, Issue 1, 2022, Pages 1-14]
Roshani, Omid Effect of some important parameters on soil conditioning [Volume 7, Issue 2, 2023, Pages 1-13]
Roshani, Omid Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2016, Pages 85-95]
Rostamabadi, Sina Development of a new method for pattern design and predicting the results of tunnel blasting based on scientific and field parametric studies under V-Cut [Volume 7, Issue 1, 2023, Pages 45-71]
Rostami, Batool Presenting the scaling law using laboratory studies on the Sungun Porphyry (SP) rock type [Volume 5, Issue 2, 2022, Pages 36-42]
Rostami, Jamal Experimental Study on the Performance of Chisel Tools in Cutting Weak to Moderate Rocks [Volume 5, Issue 1, 2021, Pages 29-41]
Rostami, Jamal Modification of RMR Rock Mass Classification System for TBM Performance Prediction in Various Rock Types [Volume 9, Issue 2, 2025, Pages 71-82]
S
Saberi Varzaneh, Ali In-situ evaluation of compressive strength of rocks and repair mortars using the "torsion" method [Volume 6, Issue 1, 2022, Pages 31-38]
Saberi Varzaneh, Ali Application of a new test for in-situ measurement of uniaxial compressive strength of rocks and concrete [Volume 6, Issue 3, 2021, Pages 50-57]
Sabouri, Hadi Numerical study of the effect of rock confinement on tool penetration in punch tests [Volume 5, Issue 2, 2022, Pages 43-53]
Sabouri, Hadi Softness monitoring: A new approach to evaluating the performance of disc cutters in rock cutting [Volume 5, Issue 2, 2022, Pages 84-91]
Sabri, Mansour Numerical study of the effect of rock confinement on tool penetration in punch tests [Volume 5, Issue 2, 2022, Pages 43-53]
Safavi, Seyed Mohammad Ali Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
Sajadifar, Seyed Iman Investigating the effect of heterogeneity on the fracture mechanism of rock samples [Volume 6, Issue 3, 2021, Pages 22-31]
Salehi, Ehsan Development of a new method for pattern design and predicting the results of tunnel blasting based on scientific and field parametric studies under V-Cut [Volume 7, Issue 1, 2023, Pages 45-71]
Samimi Namin, Farhad Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
Samimi Namin, Farhad Determining the Optimal Direction of Grout Injection Holes in the Cut Off Curtain of Safarood Dam Using Combination of Hydraulic Conductivity Tensor and Lugeon Test [Volume 9, Issue 2, 2025, Pages 43-69]
SamimiNamin, Farhad Development of an Adaptive Neuro-Fuzzy Inference System (ANFIS) for Intelligent Prediction of Tunnel Settlement and Evaluation of Predictive Accuracy Based on Convergence Monitoring Data [Volume 9, Issue 3, 2025, Pages 61-79]
Sanei, Manouchehr Prediction of Elastic Parameters of Carbonate Reservoir from Well Logging Data Using Machine Learning and Multivariate Regression Methods [Volume 7, Issue 2, 2023, Pages 53-70]
Sanei, Manouchehr Slope stability analysis using a distinct element method considering the effects of fluid flow in open pit mines [Volume 7, Issue 4, 2024, Pages 73-88]
Sarfaraz, Hassan An analytical method based on stress arching theory for stabilization of soil slopes using a single row of piles [Volume 8, Issue 4, 2025, Pages 15-25]
Sarfaraz, Hassan Modeling of Slide-Head-Toppling Failure Using Limit Equilibrium and Finite Element Methods [Volume 7, Issue 3, 2023, Pages 61-75]
Sarfarazi, Vahab Study of failure of closed non-extension plane and stepped joints using PFC2D software [Volume 6, Issue 1, 2022, Pages 51-62]
Sarfarazi, Vahab Investigating the performance of shearer in long wall method using particle flow code. Case study: Tabas Parvaeh Mechanized Coal Mine [Volume 6, Issue 3, 2021, Pages 39-49]
Sarfarazi, Vahab Investigating the effect of varying penetration depth, area, and velocity on vertical and rotational forces acting on a V-shaped edge cutting disc [Volume 6, Issue 3, 2021, Pages 13-21]
Sarfarazi, Vahab Effect of Damping and Spacing to Rock Burrow Load Ratio on Rock Crushing Mechanism Using PFC2D and Wipfrog Software [Volume 5, Issue 4, 2022, Pages 20-28]
Sarfarazi, Vahab Studying the effect of microparameters of the PFC numerical model on hydraulic crack propagation [Volume 5, Issue 4, 2022, Pages 13-19]
Sarfarazi, Vahab Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
Sarfarazi, Vahab Application of Numerical Simulation to Estimate Stress Damage Thresholds in Some Types of Sandstones [Volume 8, Issue 1, 2024, Pages 1-21]
Sarfarazi, Vahab Prediction of maximum ground surface settlement due to urban tunneling operations using GEP and MEP evolutionary algorithms [Volume 8, Issue 3, 2024, Pages 57-83]
Sarlak, Mohadeseh Modeling of Slide-Head-Toppling Failure Using Limit Equilibrium and Finite Element Methods [Volume 7, Issue 3, 2023, Pages 61-75]
Sayadi, Ahmad Reza Managing risk in tunneling projects: A fuzzy TOPSIS approach for improved decision-making [Volume 9, Issue 1, 2025, Pages 81-95]
Sayehvand, Habibollah Numerical modeling of rock cutting using high-pressure water jets [Volume 6, Issue 4, 2023, Pages 34-44]
Sereshki, Farhang Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Seyed Atashi, Mostafa The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
Shafei, Erfan The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2016, Pages 35-49]
Shaghlani Lour, Mehrdad Stability analysis of the slopes upstream and downstream of the road overlooking the Haraz Dam [Volume 5, Issue 3, 2022, Pages 69-89]
Shahi, Masoud Selecting the optimal excavation method for the Zarrin Ardakan Yazd railway tunnel using the ELECTRE multi-criteria decision-making method [Volume 5, Issue 2, 2022, Pages 15-25]
Shahi Moridi, Moslem Determining the Orientation of Discontinuities Using the Drone Photography (A Case Study of the Bench at the 2450 Level of the West Wall of Sarchesheme Copper Mine [Volume 7, Issue 3, 2023, Pages 15-29]
Shahriar, Kourosh Prediction of penetration rate of EPB TBM machines in soft ground using neuro-fuzzy system (ANFIS) [Volume 7, Issue 2, 2023, Pages 15-27]
Shahriar, Kourosh Numerical Modeling of the Stability of Intersection Resulted from Slope Tunnel and Access Tunnel in Tabas Coal Mine [Volume 7, Issue 3, 2023, Pages 1-13]
Shahriar, Kourosh Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Shakour Shahabi, Reza Stability analysis of the slopes upstream and downstream of the road overlooking the Haraz Dam [Volume 5, Issue 3, 2022, Pages 69-89]
Shamsaldin Saeed, Masoud Development of a new model to predict the shear strength of unfilled natural joints [Volume 8, Issue 3, 2024, Pages 103-110]
Shamsi Gooshki, Meysam Determining the Optimal Direction of Grout Injection Holes in the Cut Off Curtain of Safarood Dam Using Combination of Hydraulic Conductivity Tensor and Lugeon Test [Volume 9, Issue 2, 2025, Pages 43-69]
Sharafisafa, Mansour Effect of Discrete Fracture Network density on hydraulic fracturing [Volume 8, Issue 3, 2024, Pages 1-10]
Sharifian, Saba The Impact of PowerDeck Application on Blasting Operations - A Case Study of the Sarab Iron Ore Mine [Volume 7, Issue 2, 2023, Pages 39-51]
Sharifi Teshnizi, Ebrahim The effect of rock chipping on the penetration rate of tunnel boring machine [Volume 7, Issue 1, 2023, Pages 23-43]
Sharifzadeh, Mostafa Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Shayan, Fatemeh Analysis of the Effects of Fault Zones on the Boreability Index and TBM Performance in Tunneling Projects (Case Study: Karaj, Ghmroud, Nowsoud, and Kerman Water Conveyance Tunnels) [Volume 9, Issue 3, 2025, Pages 81-96]
Shekari Nejad, Mohammad Slope stability analysis using a distinct element method considering the effects of fluid flow in open pit mines [Volume 7, Issue 4, 2024, Pages 73-88]
Sheykhzakariaei, Seyed Jamal Optimization of the diverted well path based on the particle swarm optimization method [Volume 6, Issue 2, 2020, Pages 43-51]
Shirazi, Hamed Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Shirazi, Hamed Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
Shirinabadi, Reza Numerical modeling of hydraulic fracturing using ABAQUS finite element software and determining the factors affecting the fracture initiation pressure [Volume 7, Issue 1, 2023, Pages 73-83]
Shirinabadi, Reza Design, construction and implementation of the first in-situ test of a blade dilatometer equipped with a vibration-sensitive electronic sensor on Line 6 of Tehran Metro [Volume 6, Issue 3, 2021, Pages 1-12]
Shirinabadi, Reza Experimental and numerical analysis to evaluate the effect of core geometry and size on the uniaxial compressive strength of concrete [Volume 5, Issue 4, 2022, Pages 63-75]
Shirinabadi, Reza Three-dimensional effect of leading beam pre-retaining system on ground settlement under conditions of spatial variability of Young's modulus in NATM tunneling (case study) [Volume 5, Issue 4, 2022, Pages 76-88]
Shirinabadi, Reza Determining the Optimal Drilling Fluid Pressure for Oil Well Stability Using Geomechanical Modeling in ABAQUS Finite Element Software [Volume 9, Issue 3, 2025, Pages 41-59]
Shoaei, Gholamreza Development of a geometric model of a 3D fractal discrete fracture network for tunnel sealing design selection [Volume 9, Issue 2, 2025, Pages 83-99]
Showkati, Alan Simulation of high-velocity rigid projectile penetration into rock mass using discrete element method with particle-flow capability [Volume 5, Issue 3, 2022, Pages 1-12]
Soltanian, Hamid Integrated IPM modeling to investigate formation particle control methods in oil reservoirs [Volume 6, Issue 4, 2023, Pages 1-9]
Soltani Mohammadi, Saeed Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
T
Taheri, Ehsan The effect of plastic strains on the deformation of oil reservoirs [Volume 6, Issue 1, 2022, Pages 1-14]
Taheri, Ehsan Integrated perimeter surface model of clay and sand based on the concepts of critical state and general dilation law [Volume 5, Issue 4, 2022, Pages 39-52]
Taheri, Ehsan Providing a Unified Anisotropic Behavioral Model for Simulating the Behavior of Soft Rocks [Volume 8, Issue 1, 2024, Pages 37-49]
Taheri, Ehsan Evaluation of the Mechanical Properties of Cement Mortar Containing Expanded Vermiculite Aggregate [Volume 8, Issue 2, 2024, Pages 1-19]
Taheri, Ehsan Evaluation of Pipe Bursting operation on Adjacent Underground facilities Using 3D Numerical Analysis [Volume 8, Issue 4, 2025, Pages 89-99]
Taheri, Ehsan Assessing the Impact of TBM Operational Parameters on Penetration Rate through Machine Learning and Multi-Stage Feature Selection [Volume 9, Issue 1, 2025, Pages 61-79]
Taheri, Ehsan Modeling the Behavior of Frozen Soil Under Freeze/Thaw Cycles with Emphasis on Depth and Temperature Change Rate Parameters [Volume 9, Issue 2, 2025, Pages 29-41]
Tahmasebi, Mohammad Ali Experimental and numerical analysis to evaluate the effect of core geometry and size on the uniaxial compressive strength of concrete [Volume 5, Issue 4, 2022, Pages 63-75]
Tahmasebi, Mohammad Ali Three-dimensional effect of leading beam pre-retaining system on ground settlement under conditions of spatial variability of Young's modulus in NATM tunneling (case study) [Volume 5, Issue 4, 2022, Pages 76-88]
Tajik, Sadegh Development of a Mathematical Model for Predicting Blast-Induced Fragmentation Considering Elastic Wave Velocities [Volume 7, Issue 2, 2023, Pages 71-82]
Taleb Beydokhti, Alireza Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Talebi nejad, Alireza Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
Talebi Nejhad, Alireza Investigating the uncertainty in the geotechnical profile of the tunnel route and its role in the occurrence of surface settlements [Volume 8, Issue 3, 2024, Pages 85-102]
Tarakameh, Alireza Numerical Modeling of the Stability of Intersection Resulted from Slope Tunnel and Access Tunnel in Tabas Coal Mine [Volume 7, Issue 3, 2023, Pages 1-13]
Tarighazali, Sadegh Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Tarigh Azali, Sadegh Numerical Analysis of Tunnel Deformation Behavior and Surface Settlement in Layered Clayey Soils with Emphasis on the Cover-to-Diameter Ratio [Volume 9, Issue 3, 2025, Pages 97-116]
Tavakoli, Hossien Experimental and Statistical Evaluation of the Subgrade Reaction Modulus of Clayey Soils from Triaxial Test Results [Volume 9, Issue 2, 2025, Pages 1-16]
Torabi, Seyed Rahman Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Torabi, Seyed Rahman The effect of the mechanical parameter distribution (friction angle) of a discrete fracture network on the strength of the rock mass [Volume 5, Issue 3, 2022, Pages 13-20]
Torabi, Seyed Rahman Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
U
Uromeihy, ali Analysis of the Effects of Fault Zones on the Boreability Index and TBM Performance in Tunneling Projects (Case Study: Karaj, Ghmroud, Nowsoud, and Kerman Water Conveyance Tunnels) [Volume 9, Issue 3, 2025, Pages 81-96]
V
Vahedi, Amirhossein Validation of numerical simulation of fluid flow through rough rock fractures using physical modeling based on 3D printing [Volume 8, Issue 4, 2025, Pages 53-64]
Y
Yari Malekabad, Mojtaba Investigating the relationship between fundamental frequencies produced by rotary drilling and the physical and mechanical properties of carbonate rocks [Volume 5, Issue 2, 2022, Pages 63-72]
Z
Zaheri, Behnam Effect of Damping and Spacing to Rock Burrow Load Ratio on Rock Crushing Mechanism Using PFC2D and Wipfrog Software [Volume 5, Issue 4, 2022, Pages 20-28]
Zare, Shokrollah Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
Zare, Shokroulah Development of drillability index of jointed rock mass based on rock fracture index in drilling with TBM [Volume 5, Issue 3, 2022, Pages 90-104]
Zare, Shokroullah Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
Zoheiri, Masoud Presenting an experimental model for predicting the blade consumption rate of full-section tunnel boring machines (TBM) [Volume 5, Issue 1, 2021, Pages 1-9]
