JOURNAL OF ROCK MECHANICS

JOURNAL OF ROCK MECHANICS

Keyword Index
A
  • ABAQUS software Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
  • Abrasion Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
  • Acoustic Emission Effect of Loading Rate on the Failure Mechanism of Rocks under Indirect Tensile Loading [Volume 1, Issue 2, 2017, Pages 55-65]
  • Analytical model Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
  • Analytical Solution Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
  • ANFO Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2017, Pages 11-22]
B
  • Bearing Capacity Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
  • Bearing Capacity Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
  • Blast Damage Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2017, Pages 11-22]
  • Boreability Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
  • Borehole Diameter Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
  • Boring machine Operation Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
C
  • Co-linearity Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2017, Pages 85-95]
  • Concrete lining Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
  • Confining Pressure The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
  • Confining Pressure Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
  • Construction Model Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
  • Crack growth path Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
  • Cutter Edge Shape Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
  • Cylindrical punch Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2017, Pages 51-61]
D
  • DAT Innovative Model Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
  • Deformation behavior Investigation of the mechanical behavior of basalt samples with cracks of different numbers and angles under uniaxial compressive stress [Volume 1, Issue 4, 2017, Pages 1-9]
  • Discrete Elements Method Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
  • Double Shield Universal TBM Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
  • Dynamic Analyze The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2017, Pages 35-49]
E
  • Emam Zadeh Hashem Tunnel Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
  • Empirical Analytical and Numerical Methods Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
  • Empirical relationship Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
  • Energy absorption Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2017, Pages 75-84]
  • Experimental Tests Comparison of Facture Toughness Values in Single Edge Crack Round Bar Bending Test (SECRBB) and Straight Notch Disk Bend Test (SNDB) for Basalt Rocks [Volume 1, Issue 2, 2017, Pages 1-8]
F
  • Failure mechanism Effect of Loading Rate on the Failure Mechanism of Rocks under Indirect Tensile Loading [Volume 1, Issue 2, 2017, Pages 55-65]
  • Fault Zone Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
  • FLAC3D Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
  • Fluid Flow The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
  • Fracture Mechanics of Rocks Comparison of Facture Toughness Values in Single Edge Crack Round Bar Bending Test (SECRBB) and Straight Notch Disk Bend Test (SNDB) for Basalt Rocks [Volume 1, Issue 2, 2017, Pages 1-8]
  • Fracture of particles Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
  • Fracture Toughness of Rocks Comparison of Facture Toughness Values in Single Edge Crack Round Bar Bending Test (SECRBB) and Straight Notch Disk Bend Test (SNDB) for Basalt Rocks [Volume 1, Issue 2, 2017, Pages 1-8]
  • Fuzzy FMEA Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
  • Fuzzy-TOPSIS method Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
G
  • Geologically Related Delays (GRRD) Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
  • Granular Materials Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
H
  • High deformable concrete (HDC) Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2017, Pages 75-84]
  • Higher order terms Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
  • Hydraulic fracturing Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
  • Hydraulic fracturing Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
I
  • Impact-Probability Matrix Method The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2017, Pages 35-49]
  • Injection Fluid Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
J
  • Jointed Rock Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
  • Joint rock Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
K
  • Koohin Railway Tunnel The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2017, Pages 35-49]
L
  • LDP Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
M
  • Maximum tangential stress criterion Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
  • Modulus of deformation Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
  • Monte Carlo Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
  • Multivariate linear regression Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
N
  • Non-hydrostatic stress Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
  • Numerical method Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
O
  • Ovaling Deformation Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
P
  • Packer Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
  • Particle Shape Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
  • Penetration Index Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
  • PFC2D Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
  • PFC3D software The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
  • Powder factor Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2017, Pages 85-95]
  • Pressure range Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
  • Principle Components Analysis Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2017, Pages 85-95]
  • Probability Density Function Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
  • Production cost function Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
  • Productivity (U) Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
Q
  • Qom Formation Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2017, Pages 51-61]
  • Quantitative roughness parameters Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
R
  • Random variable Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
  • Ranking Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
  • Reliability Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
  • Reliability Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
  • Representative geometric models Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
  • Risk Assessment Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
  • Risk Management The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2017, Pages 35-49]
  • RMR Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
  • Rock cutting Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
  • Rock foundation Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
  • Rock mass Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
  • Rock mass Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
  • Rock Mass Discontinuity Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2017, Pages 11-22]
  • Rock Mass Properties Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2017, Pages 11-22]
  • Rock Mass Rating (RMR) Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
  • Rock materials Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
  • Rock Resistivity Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
  • Roughness Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
S
  • Sand production The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
  • Seimare and Talwar Dams Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
  • Seismic Loading Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
  • SLDP Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
  • Slurry Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
  • Soil Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
  • Soil-structure interaction Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
  • Southwest Iran Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
  • Squeezing environments Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2017, Pages 75-84]
  • Statistical method Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2017, Pages 85-95]
  • Step-by-step method Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
  • Sungun Copper Mine Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
  • Support stiffness Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
T
  • TBM Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
  • TBM Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
  • Temporary Storage Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
  • Time and Cost Uncertainty Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
  • Tool Wear Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
  • Toughness Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2017, Pages 23-33]
  • True Triaxial Testing Machine Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
  • Tunnel Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
  • Tunnel Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2017, Pages 85-95]
  • Tunnel Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2017, Pages 75-84]
  • Tunnel Boring Machine Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
  • Tunnel Boring Machine Application of Time Series Model to Predict the Penetration Rate of Tunnel Boring Machine [Volume 1, Issue 4, 2017, Pages 63-73]
  • Tunnel Boring Machine Selection Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
  • Tunnel Boring Machine (TBM) Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
U
  • Uniaxial compressive strength Investigation of the mechanical behavior of basalt samples with cracks of different numbers and angles under uniaxial compressive stress [Volume 1, Issue 4, 2017, Pages 1-9]
  • Uniaxial compressive strength (UCS) Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2017, Pages 51-61]
  • Updating the DAT Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]