Afshin, Hasan Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
Ahangari, Kaveh Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
Akbardoost, Javad Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
Alilou Kesejini, Yaser Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
Alinezhadi, Ali Hossein Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
Aminzadeh, Ali Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
Amoun, Sadegh Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Aslanzadeh, Mahnaz Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
Ataei, Mohammad Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
B
Bagheripour, Mohammad Hossein Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
Bahramifar, Amir Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
Bakhshandeh Amnieh, Hassan Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
Bakhtavar, Ezzeddin Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
Basaligheh, Farnoosh Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
Basirat, Rouhollah The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
C
Caracos, Morat Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Cheshmi, Akbar Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
D
Daraii, Rahman Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
E
Eftekhari, Seyed Mosleh Application of Time Series Model to Predict the Penetration Rate of Tunnel Boring Machine [Volume 1, Issue 4, 2016, Pages 63-73]
Emami Tabrizi, Mehrdad Increasing the energy absorption of tunnel lining sections by using High Deformable Concrete elements in squeezing environments [Volume 1, Issue 4, 2016, Pages 75-84]
F
Fahimifar, Ahmad Evaluation of Effective Factors on the Breakage of Granular Materials Using Discrete Element Method (DEM) [Volume 1, Issue 1, 2017, Pages 1-10]
G
Ghanavati Nasab, Mehdi Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
Ghasemi, Ebrahim Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
Ghasemzadeh, Hassan Investigation of the mechanical behavior of basalt samples with cracks of different numbers and angles under uniaxial compressive stress [Volume 1, Issue 4, 2016, Pages 1-9]
Ghazvinian, Abodlhadi Effect of Loading Rate on the Failure Mechanism of Rocks under Indirect Tensile Loading [Volume 1, Issue 2, 2017, Pages 55-65]
Gholamhoseinpour, Ali Reliability Analysis of Bearing Capacity of Foundations on Rock Masses Using Monte Carlo Method [Volume 1, Issue 1, 2017, Pages 11-23]
Goshtasbi, Kamran The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
Goshtasbi, Kamran Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
H
Hadei, Mir Raouf Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
Haghnejad, Ali Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
Haidari, Mojtaba Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Hasani, Saeed The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2016, Pages 35-49]
Hassanpour, Jafar Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
Hayati, Mohammad Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2016, Pages 85-95]
Heidari, Mojtaba Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2016, Pages 51-61]
Hossaini, Mohammad Farouq Investigation of the mechanical behavior of basalt samples with cracks of different numbers and angles under uniaxial compressive stress [Volume 1, Issue 4, 2016, Pages 1-9]
Hosseini, Mehdi Predicting the modulus of deformation of rock masses in southwestern Iran using multivariate linear regression [Volume 1, Issue 1, 2017, Pages 89-96]
J
Jafarnejad Qarahasanlou, Ehsan Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Jafar Shirzad, Peyman Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Jafar Shirzad, Peyman Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
Jalali, Seyed Hossein Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2016, Pages 51-61]
Jalali, Seyed Mohammad Esmaeil Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
Jalili Kashtian, Yavar Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
K
Keyhani, Ali Distribution function of random variable of shotcrete lining thickness in temporary tunnel support [Volume 1, Issue 1, 2017, Pages 55-67]
Khademi Hamidi, Jafar Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
Khademi Hamidi, Jafar Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
Khalo Kakaei, Reza Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
Khanlari, Gholamreza Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
L
Lotfi, Omid Investigating the relationship between the productivity of a double-shield tunnel boring machine and the rock mass scoring system [Volume 1, Issue 3, 2017, Pages 67-76]
M
Maarefvand, Parvizz Numerical Investigation of Rock Mass and Explosive Properties on Blast Damage in Rock Slopes [Volume 1, Issue 4, 2016, Pages 11-22]
Mahmoodzadeh, Arsalan Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
Masoudi, Majid Evaluation of analytical models for estimating cement slurry volume in jointed rock with an insight into injection results in the Seimare and Talwar dams [Volume 1, Issue 3, 2017, Pages 27-37]
Mazhabi, Masoud Application of Time Series Model to Predict the Penetration Rate of Tunnel Boring Machine [Volume 1, Issue 4, 2016, Pages 63-73]
Mikaeil, Reza Development of a new economic model to evaluate costs in the carbonate rock cutting process [Volume 1, Issue 3, 2017, Pages 39-46]
Mikaeil, Reza Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
Mikaeil, Reza Selecting the Appropriate Tunnel Boring Machine (TBM) Using Fuzzy-TOPSIS Technique Case Study: Emam Zadeh Hashem Tunnel [Volume 1, Issue 2, 2017, Pages 29-40]
Mikaeil, Reza The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2016, Pages 35-49]
Mikhak Beiralvand, Nasrin Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
Mirzaei, Hossein Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Mirzaei, Hossein Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
Mohammadi, Reza Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
Mohammadyari, Zohreh Locating the Poorkan-Vardij Fault Zone in the Second Lot of Karaj Water Conveyance Tunnel Using Actual TBM Performance and Operational Parameters [Volume 1, Issue 2, 2017, Pages 67-74]
Mohseni, Hassan Controls of various cylindrical punch mandrel diameter on determination of uniaxial compressive strength of some sedimentary rocks of the Qom Formation [Volume 1, Issue 4, 2016, Pages 51-61]
Moomeni, Ali Akbar Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Moosavi, Mehdi Comparison of Facture Toughness Values in Single Edge Crack Round Bar Bending Test (SECRBB) and Straight Notch Disk Bend Test (SNDB) for Basalt Rocks [Volume 1, Issue 2, 2017, Pages 1-8]
N
Nejati, Hamid Reza Effect of Loading Rate on the Failure Mechanism of Rocks under Indirect Tensile Loading [Volume 1, Issue 2, 2017, Pages 55-65]
Nikkhah, Majid Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
P
Pakdaman, Ali Mohammad Comparison of Facture Toughness Values in Single Edge Crack Round Bar Bending Test (SECRBB) and Straight Notch Disk Bend Test (SNDB) for Basalt Rocks [Volume 1, Issue 2, 2017, Pages 1-8]
R
Rahman Nejad, Reza Determination of Longitudinal Deformation Profile for Supported Tunnels (SLDP) Using Numerical Modeling [Volume 1, Issue 1, 2017, Pages 25-33]
Rahman Nejad, Reza Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
Rashiddel, Alireza Numerical Validation of Seismic Analytical Solutions of Circular Tunnels (Case Study: Tehran Metro Line 6) [Volume 1, Issue 2, 2017, Pages 9-27]
Rastin, Amir Estimation of crack growth path in rock materials under combined loading I/II [Volume 1, Issue 3, 2017, Pages 17-26]
Roshani, Omid Determination of the Powder Factor Based on Geomechanical Parameters of Rock Mass (Case Study - Seymareh Dam and Power Plant Project) [Volume 1, Issue 4, 2016, Pages 85-95]
S
Safavi, Seyed Mohammad Ali Assessment of the Ground Vibration Risk Caused By Blasting Using a Developed FMEA Approach in an Uncertain Environment [Volume 1, Issue 1, 2017, Pages 43-53]
Samimi Namin, Farhad Determination of specific rock cutting forces and energy by numerical simulation of disc cutter performance in a full-section tunneling machine [Volume 1, Issue 3, 2017, Pages 55-66]
Sarfarazi, Vahab Investigating the Effect of Cutter Edge Shape on Rock Fragmentation Using PFC2D [Volume 1, Issue 2, 2017, Pages 75-88]
Sereshki, Farhang Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Seyed Atashi, Mostafa The Effect of Confining Pressure on the Sand Production in Hydrocarbon Reservoirs by Using Discrete Element Method [Volume 1, Issue 1, 2017, Pages 35-42]
Shafei, Erfan The dynamic risk analysis for great section tunnels using impact-probability matrix method; A case study of Koohin railway tunnel in Qazvin-Rasht route [Volume 1, Issue 4, 2016, Pages 35-49]
Shahriar, Kourosh Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Sharifzadeh, Mostafa Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Shirazi, Hamed Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Shirazi, Hamed Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
Soltani Mohammadi, Saeed Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
T
Taleb Beydokhti, Alireza Fatigue behavior of hard rocks under cyclic loading [Volume 1, Issue 4, 2016, Pages 23-33]
Talebi nejad, Alireza Investigating the effect of joint geometry on estimating rock joint roughness using statistical studies [Volume 1, Issue 3, 2017, Pages 77-89]
Tarighazali, Sadegh Comparison of different methods for assessing the abrasion of soft soils in mechanized tunneling [Volume 1, Issue 3, 2017, Pages 1-16]
Torabi, Seyed Rahman Laboratory study of the effect of pressure interval length on fracture pressure in hydraulic fracturing [Volume 1, Issue 3, 2017, Pages 47-53]
Torabi, Seyed Rahman Study of the Effect of Fracture Fluids Viscosity and Borehole Diameter on Hydraulic Fracturing Breakdown Pressure Using a Newly Developed True Triaxial Apparatus [Volume 1, Issue 2, 2017, Pages 89-98]
Z
Zare, Shokrollah Providing the DAT Innovative Model to Estimate Time and Cost of Tunnel and Updating with the Data Acquired During Excavation [Volume 1, Issue 1, 2017, Pages 69-88]
Zare, Shokroullah Determination of Geomechanical Parameters and Allowable Bearing Capacity of the Rock Foundations of Surface Crude Oil Tanks in Khark Island [Volume 1, Issue 2, 2017, Pages 41-53]
